Analisis Perawatan Fasilitas Kantor pada Instansi X
DOI:
https://doi.org/10.58684/jarvic.v2i4.98Keywords:
Facilities, Maintenance, OfficeAbstract
. This research aims to determine the maintenance of office facilities at Institute X, which includes the maintenance process and scheduling of office facility maintenance. This research uses a qualitative method with a descriptive approach, namely by describing and analyzing the problems found. The subjects of this research are four employees of Institute X for Finance, General Affairs, and Logistics. Qualitative research is based on primary data and secondary data. Primary data in this research was obtained by conducting observations, interviews, and documentation, while secondary data was obtained through books, previous research, and articles related to research. The results of this research show that Institute X has carried out routine maintenance of office facilities, such as air conditioners and official vehicles. However, not all office facilities receive attention in their maintenance. This can be seen from the lack of lighting in the guest waiting room, which makes the room look dark. Then, there is no storage space or warehouse, which causes unused office equipment to be placed in the multipurpose room, where this room is also used as a meeting room.
References
Aditya Irawan, N. S. (2018). Pengaruh Gaya Kepemimpinan, Fasilitas Kantor, Dan Disiplin Kerja Terhadap Kinerja Pegawai Dinas Perdagangan Kota Semarang. Economic Education Analysis Journal, 7(1), 265–278.
Almahri, A. F., & Kamal, D. M. (2019). Perencanaan dan Penjadwalan Pemeliharaan Mesin KAESER Rotary Lobe Blower Model HB 1600 PI di PT. Lotte Chemical Titan Nusantara. Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta, 798–803. http://semnas.mesin.pnj.ac.id
Amalia, S., & Saputra, E. (2020). Pemeliharaan Jaringan Saluran Udara Tegangan Menengah (SUTM) 20 kV Feeder Mata Air. Jte-Itp, 9(2), 61–65.
Assyakurrohim, D., Ikhram, D., Sirodj, R. A., & Afgani, M. W. (2022). Metode Studi Kasus dalam Penelitian Kualitatif. Jurnal Pendidikan Sains Dan Komputer, 3(01), 1–9. https://doi.org/10.47709/jpsk.v3i01.1951
Fikri, R. G. (2019). Pentingnya Peranan Safety Equipment Pada Kn. Suar Ii Dalam Kegiatan Perbaikan dan Perawatan Sarana Bantu Navigasi Pelayaran Di Wilayah Distrik Navigasi Kelas Ii Semarang. CWL Publishing Enterprises, Inc., Madison, 2004(1974), 9. http://biblioteca.usac.edu.gt/tesis/08/08_2469_C.pdf
Habsyi, F. Y. (2020). Pengaruh fasilitas belajar terhadap prestasi belajar siswa SMA Nusantara Tauro. Jurnal Pendidikan Dan Ekonomi, 2(1), 13–22.
Hamid, I., DM, R., & Gusti, D. H. (2023). Pengaruh Fasilitas Kantor, Motivasi Kerja Dan Disiplin Kerja Terhadap Kinerja Satgas P2Kl Pada Dinas Lingkungan Hidup Kabupaten Bantaeng. Nobel Management Review, 4(2), 291–303. https://doi.org/10.37476/nmar.v4i2.4030
Helwig, N. E., Hong, S., & Hsiao-wecksler, E. T. (n.d.). Buku Metode Penelitian Kualitatif.
Jufrizen, J. (2021). Pengaruh Fasilitas Kerja Dan Disiplin Kerja Terhadap Kinerja Karyawan Melalui Motivasi Kerja. Sains Manajemen, 7(1), 35–54. https://doi.org/10.30656/sm.v7i1.2277
Khaurullah, F., Hr, D. A., & Darmadi. (2022). Analisis Penentuan Waktu Kegiatan Perawatan Preventif Yang Tepat Bagi Mesin Produksi Glasstube Lampu 2U Sesuai Keandalannya ( Studi Kasus : PT . Panca Aditya Sejahtera ). Jurnal Teknik Industri, 25(1), 52–75.
Muh. Irfan, Rajindra, & Sarifuddin. T. (2020). Analisis Pengelolaan Fasilitas Kerja terhadap Kualitas Kerja Pegawai pada Kantor Dinas Perhubungan Kabupaten Sigi. Jurnal Kolaboratif Sains, 3(9), 492–498. https://doi.org/10.56338/jks.v3i9.1762
Nasution, M., Bakhori, A., & Novarika, W. (2021). Manfaat Perlunya Manajemen Perawatan Untuk Bengkel Maupun Industri. Buletin Utama Teknik, 16, No. 3, 248–252.
Praharsi, Y., Kumala Sriwana, I., & Sari, D. M. (2018). Perancangan Penjadwalan Preventive Maintenance Pada Pt. Artha Prima Sukses Makmur. Jurnal Ilmiah Teknik Industri, 13(1), 59–65.
Pratiwi, C., & Irwansyah. (2020). Office Interior Design At The W Design Corporation. Jurnal Fakultas Seni Dan Desain, 1, 1–12. http://e-journal.potensi-utama.ac.id/ojs/index.php/FSD/article/view/701/999
Pratiwi, J. (2019). PENGARUH FASILITAS KERJA TERHADAP KINERJA PEGAWAI PADA BAGIAN SEKRETARIAT BADAN PENGELOLAAN KEUANGAN DAERAH PROVINSI SULAWESI SELATAN. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224(11), 122–130.
Rosyid, M. A., & Indrayana, M. (2023). Penjadwalan Pemeliharaan Mesin Filling Bag Menggunakan Metode Reliability Centered Maintenance ( RCM ) di PT . SHGM. 294–303.
Shaf’at, A., Retnoningsih, D., & Khusnuliawati, H. (2020). Sistem pengelolaan kendaraan dinas di pemerintah kota salatiga. Gaung Informatika, 13(2), 139–150.
Sitio, R., & Marhandrie, D. (2020). Sikap sosial Ekonomi Masyarakat Kampung Bandan terhadap Perawatan dan Kebersihan, Fasilitas MCK. Mpu Procuratio: Jurnal Penelitian Manajemen, 2(1), 319–324.
Zainal, R. I., & Sianturi, M. U. (2019). Administrasi Pemeliharaan Mesin Kantor Pada PT.PLN (Persero) UIWS2JB Bidang Kesekretariatan. Seminar Hasil Penelitian Vokasi (SEMHAVOK) Universitas Bina Darma Palembang, 1(1), 24–29.
